SX21 - SX24 Hydrostatic 4 wheel drive Garden tractors in 21 and 24 horsepower. With modern sleek styling, flat operator platform and class leading operating and safety features as standard. The Japanese designed and manufactured tractor is quality and performance all round. A pleasure to own and operate.

Photograph for illustration purposes - standard specifications may not match those shown.
Optional 60 inch mid mount mower deck also shown.

FEATURES OF THE SHIBAURA SX21 - SX24

Powered by high performance 3 cylinder, water cooled, Shibaura diesel engine.

Low noise and low vibration.

High fuel efficiency and low emission - the engines meet the Tier II emission standards for the stringent USA and European market.

Exhaust muffler is located under bonnet for quiet and unobstructed view for driver.

Fuel tank capacity is a generous 29.5 litres.

Two range Hydrostatic transmission with two pedal control.

Maximum speed 16.1 km/h forward (10.9 in reverse).

Wet rear disc brakes provides excellent stopping power.

Optional cruise control is available; ideal for mowing large open spaces.

Hydrostatic power steering.

High steering angle for agility with a minimum turning radius of 2.3 metres.

Tractor is standard with turf or bar tyres.

.

Rear category 1 3-point linkage is standard equipment. The lift capacity of this heavy duty linkage is 318 kg at 610mm rear of the ball ends.

Ideal for a wide range of implements such as rotary hoes, slashers, mulchers and spreaders.

Standard with a clevis towing hitch.

Hydraulic pump capacity is 14.2 litres per minute. Optional double-acting hydraulic remote is available.

Mid and Rear PTO is standard equipment. The Mid PTO operates at 2200 rpm and the Rear PTO operates at 540 rpm.

The 3-position PTO control (Yellow Lever) allows the engagement of either the rear, mid or both PTOs simultaneously.

Orange Lever: Selects the Hi-Lo Hydrostatic Range.

Black Lever: Is mower deck height adjustment.

Yellow lever: PTO engagement is by an independent wet disc clutch with safety interlocks to prevent accidental tractor starting with the PTO engaged.

Black Lever: Rear Linkage raise-lower control with and additional raise-lower speed control knob (lower Black).

Black handle: is the 2WD - 4WD selection.

Lever style handbrake is standard equipment.

Linkage and PTO combination is ideal for a wide range of grounds-care and small-farm application.

For example; as shown with a Celli rotary hoe.

The general station layout is ergonomical with PTO, deck, linkage and transmission levers in easy rach of the operator on the left and right sides of the seat.

Forward/Reverse and speed selection for the hydrostatic transmission is through two foot pedals.

Note: The Standard seat pan is shown.

For operator comfort, adjustable seat suspension is standard equipment. The suspension has height, spring tension and slide adjustments.

The seat is fitted with a retractable seat belt which is a safety requirement with any ROPS tractor.

The optional delux high-back seat is shown and is also more generously padded.

The operators platform is suspended on silent blocks for a quiet and low vibration work station.

The flat and unobstructed floor, provides easy operator access from either side, without the clutter of levers and pedals as trip hazards.

For improved roll-over protection, the tractor is fitted with a foldable ROPS (Roll-Over Protective Structure). This ROPS meets the stringent European safety standards; with its forward reaching frame, it provides the maximum protected operator space as compared to the conventional straight-frame ROPS.

A Folded ROPS allows for safer mowing under trees as a taller fixed ROPS may hit and break off low branches, potentially falling onto the operator.

The flip-up bonnet conveniently provide access to essential maintenance items. The radiator has a slide-out screen that is easily cleaned and prevents radiator clogging from grass debris.

The engine air filter is a 4 inch dual element filter that is easily accessible with the bonnet up.

With the side panels easily removed, full access is available to all workshop service items such as fuel, oil and hydraulic filters.

The optional 60 inch mid-mount hanging mower deck is of heavy duty construction weighing 120kg which is indicative of the thickness of the material used throughout and its reinforced construction.
Fixed anti-scalping wheels are fitted to the deck and swivel 90 degrees for deck removal.
Pulleys are cast iron running a twin-section V belt. Pulleys are well protected with a removable guard for servicing and cleaning of the belt and pulley area.

The mower deck is hydraulically raised and lowered, with full hydraulic height control levers at the operators side.

The deck has excellent clearance in the raised position for driving over ditch and gutter obstacles.

• European standard forward-reaching ROPS (Roll-Over Protective Structure).
• Foldable ROPS for safer under-tree mowing.
• Seat belt.
• Flat floor free of trip hazards.
• PTO interlocks to prevent accidental starting with PTO engaged.
• Conventional lever handbrake.
• Australian standard road lights including indicators, brakes and reflectors.
• Large rear-view mirror.

Follow this link for the full manufacturer's Specification sheet
Note different specifications may apply in Australia.